HOME > Product Category > Patient Lift > APC-10150SL

Patient Lift APC-10150SL
Application instruction
  • Used for moving between bed, wheel chair and batch room, save the nurse from vocational injury and ensure the safety of the patient.
Specification:
  • Base is 2" OD hollow square tube, static powder coated surface.
  • Uses Danish LINAK electrical elevation cylinder, stable quality and reliable and safety.
  • Employs latest DC charging type electrical cylinder(Jumbo type), with button to switch over to manual mode in case of emergency and lower the patient.
  • Manual control smart type electrical elevation design convenience to nurse in application.
  • " U" shape base with adjustable flap angle to ensure safety in operation. Adjust to widest angle while using and to smallest while moving.
  • " U" shape base is adjustable in five stages, width can be adjust to 100cm(±5%) from 65cm.
  • Good for 40 cycles of elevation after full charge.
  • Max. pay load is 150kg(±10kg).
  • Four 4" casters, with brake device in rear wheels.
  • Never used while charging.
  • Please charge the battery while the battery display 50% power reserve.
  • Charging time is 4~12 hours, automatic cut off while fully charged.
Standard accessories
  • With one APC-112SL stretch bag.
  • Two 12V batteries, capacity is 2.7AH.
  • With one battery charger.
  • One wired elevation controller.