Patient Lift

HOME > Product Category > Patient Lift

Elitex/Apexcare patient lift manufacturer has specialized in producing electric patient lift over 21 years experience. All of our patient lift products are a complete combine with high security quality, sustained innovation, and advanced technology. Patient lift products are an integral part of the modern medical treatment care setting. They make transfers and daily activities easier and they help eliminate injury both to the caregiver and to the patient. These patient lift products are convenient and safe. Used for moving between bed, wheelchair and bath room, they save the nurse from occupational injury and ensure the safe and comfortable transfer of the patient.

Patient Lift Series:

Patient Lift APC-10170E

APC-10170E Patient Lift

  • Base is 38.1x63.5mm flat tube, static powder coated surface.
  • Uses Danish LINAK electrical elevation cylinder, stable quality and reliable and safety.
  • Employs latest DC charging type electrical cylinder(Jumbo type), with button to switch over to manual mode in case of emergency and lower the patient.
  • Manual control smart type electrical elevation design convenience to nurse in application.
  • "U" shape base with adjustable flap angle to ensure safety in operation. Adjust to widest angle while using and to smallest while moving.
  • "U" shape base is adjustable in two stage, width can be adjust to 100cm(กำ5%) from 63.5cm.

Patient Lift APC-10170EW

APC-10170EW Patient Lift

  • Manual control smart type electrical elevation design convenience to nurse in application.
  • "U" shape base is adjustable in two stage, width can be adjust to 100cm(±5%) from 63.5cm.
  • Good for 40 cycles of elevation after full charge.
  • Base is 38.1x63.5mm flat tube, static powder coated surface.
  • Uses Danish LINAK electrical elevation cylinder, stable quality and reliable and safety.
  • Employs latest DC charging type electrical cylinder(Jumbo type), with button to switch over to manual mode in case of emergency and lower the patient.

Patient Lift APC-10150E

APC-10150E Patient Lift

  • Base is 2" OD hollow square tube, static powder coated surface.
  • Manual control smart type electrical elevation design convenience to nurse in application.
  • Good for 40 cycles of elevation after full charge.
  • Max. pay load is 150kg (±10kg).
  • Four 4" casters, with brake device in rear wheels.
  • Employs latest DC charging type electrical cylinder(Jumbo type), with button to switch over to manual mode in case of emergency and lower the patient.

Patient Lift APC-10150EW

APC-10150EW Patient Lift

  • Base is 2" OD hollow square tube, static powder coated surface.
  • Four 4" casters, with brake device in rear wheels.
  • Please charge the battery while the battery display 50% power reserve.
  • Uses Danish LINAK electrical elevation cylinder, stable quality and reliable and safety.
  • Good for 40 cycles of elevation after full charge.
  • Max. pay load is 150kg (±10kg).

Patient Lift APC-10150SL

APC-10150SL Patient Lift

  • "U" shape base with adjustable flap angle to ensure safety in operation. Adjust to widest angle while using and to smallest while moving.
  • "U" shape base is adjustable in five stages, width can be adjust to 100cm (±5%) from 65cm.
  • Manual control smart type electrical elevation design convenience to nurse in application.
  • Good for 40 cycles of elevation after full charge.
  • Max. pay load is 150kg (±10kg).
  • Four 4" casters, with brake device in rear wheels.

Patient Lift APC-10121

APC-10121 Patient Lift

  • Frame: made of 1- 3/ 4" diameter round tubing with chrome plated finish.
  • Base width: 46.75" with 6.5" clearance.
  • With one hydraulic pump for manual operation.
  • Base width: open 42.25", closed 22".
  • Castors: front 5" dia, rear 5" dia with brakes.
  • Product weight capacity: 400lbs.
  • With one six- hook spreader bar.

Patient Lift APC-10120

APC-10120 Patient Lift

  • Aluminum hydraulic pump with quick release valve for easier operation.
  • 330 lbs ( 150kgs ) load capacity.
  • Powder coating finish.
  • Casiers: front 4" dia, rear 4" dia. with brakes.
  • 2" round tube stylish structure.

Patient Lift APC-10100

APC-10100 Patient Lift

  • Base is 2" OD steel tube, chrome plated surface.
  • Uses aluminum hydraulic cylinder, precise fluid passage design, easy operating, strong output; fast, allow convenience usage by the nurse.
  • "U" shape base is adjustable in five stages, width can be adjust to 100cm (±5%) from 63cm.
  • Max. pay load is 150kg (±10kg).
  • Four 4" casters, with brake device in rear wheels.
  • Standard accessories: With one APC-109SL stretch bag.

Patient Lift APC-10100W

APC-10100W Patient Lift

  • Base is 2" OD steel tube, chrome plated surface.
  • Uses aluminum hydraulic cylinder, precise fluid passage design, easy operating, strong output; fast, allow convenience usage by the nurse.
  • "U" shape base is adjustable in five stages, width can be adjust to 100cm (±5%) from 63cm.
  • Max. pay load is 150kg (±10kg).
  • Four 4" casters, with brake device in rear wheels.
  • Standard accessories: With one APC-109SL stretch bag. With one battery charger.

Patient Lift APC-10112SL

APC-10112SL Patient Lift

  • Base is 2" OD steel tube, chrome plated surface.
  • Uses aluminum hydraulic cylinder, precise fluid passage design, easy operating, strong output; fast, allow convenience usage by the nurse.
  • "U" shape base is adjustable in five stages, width can be adjust to 100cm (±5%) from 63cm.
  • Max. pay load is 150kg (±10kg).
  • Four 4" casters, with brake device in rear wheels.
  • Standard accessories: With one APC-112SL stretch bag.
Patient Lift Application Instruction

Used for moving between bed, wheel chair and batch room, save the nurse from vocational injury and ensure the safety of the patient.